What is Round Rock TX Water Damage Services ?
When the topic of Round Rock TX Water Damage Services services comes up, many often think of three basic services: water, fire, and mold. There is a good reason for this; these three issues tend to get the most attention because they are the most prevalent and potentially devastating. There are serious health implications related to these three hazards beyond the amount their repairs cost. According to the Center for Disease Control, or CDC, exposure to mold can cause symptoms from hay fever and asthma exacerbation to immune related disease or cancer.
What most people don’t realize is choosing a provider of Round Rock TX Water Damage Services go far beyond those basic services. In fact, there are plenty of other services that may require a professional to address, such as disaster recovery, structural drying, carpet cleaning and installation, upholstery cleaning, asphalt and concrete, seal coating, garment restoration and drywall painting. Not only will using a professional service save you time on completing some of the do-it-yourself projects like carpet cleaning, but it also will diminish your chances of faulty work that could lead to damage and costly repairs.
Why Round Rock TX Water Damage Services? Interesting Facts
Water damage mitigation means to control or contain / make smaller. It's to control the cost of the loss and prevent further damage from occurring by taking reasonable and prudent steps to secure and protect the property from on-going damage.
Water damage is generally arranged in 3 different categories. Scope of work and remediation process depends on category of loss. There are 3 categories of water damage restoration.
Category 1: "Clean Water" water source that does not pose substantial harm to humans. Example of category 1 includes water damage caused by a pipe, washer machine, etc.
Category 2: "Gray Water" water containing some degree of contamination. Has the potential to cause substantial discomfort or sickness.
Category 3: "Black Water" grossly unsanitary. Contains pathogenic (disease causing) agents.
Example of category 3 include water from the outside (flood damage), sewage, etc.
In addition to the water damage category, there are also different classes of water damage.
Class 1 is considered as "Slow rate of evaporation" which affects only a portion of a room. Materials have a low permeance/porosity. Minimum moisture is absorbed by the materials.
Class 2 is considered as "fast rate of evaporation" which means that water affects the entire room of carpet and cushion. May have wicked up the walls, but not more than 24 inches.
Class 3 generally is the "fastest rate of evaporation" water generally comes from overhead, affecting the entire area; walls, ceilings, insulation, carpet, cushion, etc.
Calls 4 is "specialty drying situations". This involves materials with a very low permeance/porosity, such as hardwood floors, concrete, crawlspaces, plaster, etc. Drying generally requires very low specific humidity to accomplish drying.
What to do when you do have water damage? Thorough extraction along with contents protection is necessary in order to decrease overall drying time and reduce the possibility of rust and furniture stains. Do make sure that the water damage source have been stopped and repairs have been made. Turn off electrical power to affected areas - Only if safe to do so. Wash hands after handling any wet items. Remove all small furnishings out of the affected area, making ready for the restoration technicians. Remove any paper products off the floor; books, wrapping paper, etc. to prevent damage both to the flooring materials and to the paper products. Check everywhere a remote chance of water may exist somewhere. Check all adjoining areas to the obvious affected areas, behind baseboards, under and behind cabinets, vanities and built-ins, crawl spaces - most often missed. Remove a portion of the floor insulation under the affected area and check for moisture. You will probably be surprised what you find.
Where do I find a Round Rock TX Water Damage Services Company?
Property damage caused by freezing weather occurs more frequently and creates greater damage than is commonly thought. When water freezes, its volume increases by approximately eleven percent and this expansion exerts tremendous force. This force is sufficient to break concrete or even steel! When even a small amount of water enters a structure and freezes, the resulting expansion further damages and weakens the structure allowing more water to enter. The damage cycle continues until the source problem (the initial entry point) is repaired.
A number of variables acting separately or together contribute to freeze damage. A drop in temperature, the type of building construction, the amount and quality of insulation, the direction and force of wind, and other weather related conditions are all contributing factors.
An occupied building is not completely free from freeze related damages, even when it is constructed to withstand freezing weather and is properly maintained and heated. However, a significant amount of freeze damage occurs when a building is not occupied, especially if the owners are gone for an extended period, and the heating system is not on during the freezing weather. In northern climates, many people go south for the winter. They winterize their homes before they leave by draining the plumbing system and adding antifreeze to plumbing fixtures. Frequently this is not completely effective, and the owners find freeze damage when they return.
Draining the plumbing system needs to be thorough and complete. If the water lines sag or bow, it can result in a low spot that is nearly impossible to completely drain. To be most effective, draining the water lines should be accompanied by the use of compressed air to blow out the lines. If this is not done, water will rest and freeze in the low points of the lines and may cause the pipes to break. The damage then is discovered only after the water is turned back on and escapes from that break. Virtually all plumbing lines are placed inside walls and are not visible. As a result, a freeze caused leak is only discovered when water damage to floors, carpet, walls, or ceilings becomes visible. Occasionally the sound of spraying water can be heard by an occupant, but by then it may already be too late. The leak has already caused some degree of damage.
People living in the south usually consider themselves immune from this type of damage. Because of this sense of security, construction in the southern parts of the country often does not adequately take into consideration that fact that the temperature does occasionally drop below freezing. When that happens and property is poorly insulated, then damage will occur.
Winter wind, snow or ice storms frequently damage electric power lines and equipment resulting in interruptions of electric power. Most heating systems depend on electricity, and when the power goes off, so does the heat. In severe cold weather, this can result in extensive freeze damage before power is restored.
Buildings that are poorly designed and do not withstand weather well can contribute to their own damage. Many old buildings were not insulated at all. To avoid freezing, plumbing lines were commonly run along the inside of interior walls and ceilings rather than enclosed within the walls. In some cases, many lines simply ran inside un-insulated walls. During renovation of some old homes, blown or foam insulation has been added into wall cavities between interior and exterior wall surfaces and between each stud. This process many times served to insulate heat away from pipes that were located inside of walls and adjacent to the exterior wall surfaces or in attics, actually making them more susceptible to freezing.
The type and age of the plumbing system is also a factor. Rust or corrosion weakens pipes, making leaks easier to occur. When freeze expansion occurs, such pipes will often split open. As thawing begins or when the water is turned back on, this situation will result in water damage.
There is also a form of direct damage that can occur from extreme cold even though no moisture is present. Most building materials and personal property are unaffected by cold alone, provided they are dry. Extremely cold temperatures can damage some sensitive computer and other electronic components. In northern climates, temperatures commonly fall below zero and occasionally dip to minus 40 to 50 degrees. The contraction associated with those extremely low temperatures can congeal Liquefied Petroleum Gas (LPG) and fuel oil, causing heating system failure.
Regardless of the circumstances if water damage occurs from freezing or other sources, call your insurance claims office. The professionals in your insurance companys claims center will offer you emergency advice to mitigate the loss to prevent further damage; they will assign an adjustor who will make an appointment to assess the damage and make recommendations for the proper repair of the situation.
Which Round Rock TX Water Damage Services service provider is performs 24/7 water damage services?
Flooding and water damage can be devastating to your home and belongings. Many people do not consider the fact that there are different types of problems related to flooding and different causes. The type of damage caused by water in your home will determine the appropriate course of action to get the problem resolved so you can go back to normal life in your home. One of the first considerations is how the flooding occurred. Flooding can happen in storm periods or near bodies of water from the outside environment surrounding the house. Flood damage is a common problem after a fire, because what is necessary to put out the fire affects multiple areas in the home. However, flooding can also originate within the home, from broken or malfunctioning plumbing or pipe work.
When you find the source of excess water, you can determine the type of water causing damage in your home. There are three main categories of water: clean, gray, and black. Clean water has very few harmful substances in it, such as when water supply lines are broken, spilling forth clean, fresh water. It can still cause water damage, but there is little chance of bacteria or chemicals causing disease in the wake of the flooding. When sinks or tubs overflow, the water is also usually considered clean.
Gray water, formally known as category 2 water, can cause sicknesses and physical problems because the level of contaminants in the water is significant. These contaminants may be chemical, biological, and/or physical. Gray water will have micro-organisms present as well. Some examples of water damage with category 2 implications are sump pump failures, discharges from dishwashers, malfunctioning washing machines, or overflowing toilets (containing urine but not feces). Black water, or category 3 water, has a severe level of contaminants and is very unsanitary. This water is highly disposed to cause physical problems, diseases, or discomfort.
Black water has bacteria, fungi, chemical contaminants, and other dangerous substances. Category 3 water damage may come from lakes, streams, rivers, seawater, ground surface water, sewage leaks, overflowing toilets with feces, and stagnant water that stands for 48-72 hours after a category 1 or 2 flood problem. The standing of the water increases its dangerous contaminants. Black water clean-up requires the use of protective gear and special equipment to prevent disease or health problems as well as preserve the structure. Trusting clean up and restoration to professionals can help you get your home back quickly and safely.
For More Information on Round Rock TX Water Damage Services